Sliding Balcony and Patio Door Repairs
8 Longmore Avenue Barnet London EN4 8AF
0782 436 0689
abcslidingdoors@gmail.com
Repairs to sliding doors in London Borough of Newham
Siegenia Tilt and Slide double door E16 Royal Docks. From the inside, the left hand door has a broken handle gearing and also needs bottom two corner brackets replaced. From the inside right-hand door, three corner brackets need replacing. Therefore both doors will need to be taken off for parts to be replaced.
Double tilt and slide door stuck in locked position. The gearing for the multi point locking mechanism is broke therefore this results in the lock from disengaging. The runners have deteriorated. This resulted in the doors to hang lower than their correct position. Which has likely caused damage to the locking mechanism.
Tilt and slide door with faulty running gear, causing issues with closing the door. The system sticks in the tilt mode, due to the door sitting too low as a result of failing wheels.
Repair to tilt and slide door in E16 royal docks. The runners on this door have deteriorated. They need to be replaced and also the handle on which the cogs have broken.
Lift and Slide Siegenia Aubi door in Silvertown E16. It has a broken locking mechanism that needs replacing. When large lever handle is pushed down to the lift position there is no response.
Hautau Lift and Slide door in E16 Royal Docks is tilting. When the door is closed there is a gap towards the bottom. Also the door is dragging making it very heavy to open and close. This is because the innermost runners are lowered and causing the door to be unaligned. The runners need replacing…
Lift and slide doors with Hautau mechanism have become un-aligned. This may be due to damage to one of the wheels which will need replacing. So now when the door is close the locks do not fully catch the keeps along the frame of the door which is leaving a gap at the bottom allowing…
Bi-fold doors consist of many moving parts as part of their operating mechanism. In cases such as these, it may be more financially viable or necessary to carry out a bespoke repair. Our skilled engineers have years of experience in carrying bespoke repairs to doors which would otherwise be considered repairable. in many cases, our…
When a Bifolding door begins to drag along at the bottom when attempting to open. There can be many different things that can cause this. The outer frame of the Bifolding door losing its shape and therefore causing the door to become misaligned. The hinges on the Bi-fold door loosening of breaking. The rollers being…
