Sliding Balcony and Patio Door Repairs
8 Longmore Avenue Barnet London EN4 8AF
0782 436 0689
abcslidingdoors@gmail.com
Tilt and Slide doors, Hoxton London N1. The runners have failed causing the doors to hang too low, therefore they do not close or slide properly. In addition, the runners, comprising bogies and swing arms are to be replaced. The door will be re-aligned for correct operation.
1st generation of Tilt and Slide running system failed. Therefore the door was no longer sliding properly. In addition the door was not closing or opening. The Runners were replaced with updated system
Tilt and slide doors. Surbiton, Surrey, KT6 Tilt and slide doors. The top corner bracket on the handle side is missing therefore it’s not allowing the bolts on the opposite handle side to function and above all lock into place. As a result needs to be replaced.
Unaligned Lift and slide door Balham SW12. There is a problem with the runners which is therefore making the door slightly tilt. This means that the door is not closing properly from the top keep. Possible adjustments to the keep will have to be made or on the other hand replacement of the runners.
Old style aluminium doors Hackney E5. The lock has been replaced. The internal hook on the locking mechanism does not reach the keep on the frame. A solution therefore is to extend the keep on the frame. This therefore ensures that it reaches the hook on the locking mechanism. Because the door is over 20…
Damaged track on an Old style aluminium sliding door on the front of the house patio in Palmers Green N13. The track is damaged and therefore will need to be replaced. The wheels on the actual door will need replaced as well. The turn lever on the inside of the door on the handle is…
Repair to tilt and slide door in E16 royal docks. The runners on this door have deteriorated. They need to be replaced and also the handle on which the cogs have broken.
Bi-fold door repair in Hatfield AL3. These bi-fold doors have lowered to the extent that one of the runners has actually come off the door. The whole door is now sitting on the track and cannot be moved or open unless the door is lifted by two people. This occurred at the same time as…
Lift and Slide Siegenia Aubi door in Silvertown E16. It has a broken locking mechanism that needs replacing. When large lever handle is pushed down to the lift position there is no response.
Wooden BI-Fold doors East Greenwich SE3. The end door is tilting so not closing properly. Adjustments need to be made to the hinges and runners. Also the frame keeps need to be pushed out further to meet the lock to enable it to latch more easily.
Old style wooden sliding door Lewisham SE13 The handle is broken and needs is to be replaced and the handle fixed. Also the runners have deteriorated and need to be replaced. The track is damaged but not so bad that the door will not run smoothly once the runners have been replaced.
Bi-Folding door Kingston, KT2. The end door is hanging because it needs to be raised. Most Importantly this is an issue connected to the settle of the extension.
Bi-Fold door problems Hampstead NW3. These doors are not opening and closing properly and when trying to lock the bolts are difficult to shut. The doors have been installed onto a part of the building that is an extension. Slight movements in that part of the building may have caused this issues.
Tilt and slide doors with GU System in St John’s wood NW8 This is a double door system. because both doors slide inwards towards each other. the runners (also known as bogies) on one of the doors have deteriorated. This has resulted in lowering causing the doors to be unaligned. Because one of the top…
Aluk Bi-Folding doors in Willesden W10. Locking mechanism needs repair as it is jamming but not broken. A new locking cylinder is needed. The middle door also needs to be re-aligned. The rubber seal on the top edge is being pulled away because the door is scraping against the top.
Hautau Lift and Slide door in E16 Royal Docks is tilting. When the door is closed there is a gap towards the bottom. Also the door is dragging making it very heavy to open and close. This is because the innermost runners are lowered and causing the door to be unaligned. The runners need replacing…
Solarlux damaged Bi-fold doors in Ealing W5. The locking mechanism on the end door is damaged preventing the bottom bolt from engaging when the handle is turned. The top upward connected bolt is still engaging and working. This is creating a security issue as the door can be wedged open at the bottom from the…
Aluminium sliding doors in Surbiton KT5. In this case during heavy rain, water is getting trapped along the channel of the inside bottom track.
GU Tilt and Slide has had one of the runners broken through misuse. This is not allowing the door to close properly and so the runners will need to be replaced.
Lift and slide doors with Hautau mechanism have become un-aligned. This may be due to damage to one of the wheels which will need replacing. So now when the door is close the locks do not fully catch the keeps along the frame of the door which is leaving a gap at the bottom allowing…
