Sliding Balcony and Patio Door Repairs
8 Longmore Avenue Barnet London EN4 8AF
0782 436 0689
abcslidingdoors@gmail.com
These bifolding doors were damaged because of the existing wooden structure on a garden office. Due to the severe hot summer, the wooden structure had altered the shape and had strained the hinges on the bifolding doors. This caused damage to the hinge guide wheels, which then needed to be replaced and then realigned to…
This is an old style, traditional aluminium sliding door in Kennington SE17. It has been dragging along the bottom and scraping the rib of the metal track. Thankfully, it has not really done any damage to the track itself, but the wheels will need replacing. There are two sets of Wheels which will need to…
We encountered a problem with this Siegenia Wooden Lift and Slide Door in Brixton. Our clients not only had an issue with opening the door, it was the only access to the back garden. In order to investigate we were going to have to access the door via the next door neighbour and a high…
This job involved a traditional Sliding Door. On assessing this door we found that is was part of a studio office situated in the garden. The door was purchased second hand and installed. Once installed the door has never closed properly. On investigation we found this door to have alignment issues. The locking mechanism works…
We assessed a traditional sliding door in croydon. This Sliding Door has a traditional solid bar mechanism, with a lever behind that engages once the door is in the locked position. This door is unaligned as the wheels need replaced. The door will fully function by taking the door off, replacing the wheels and realigning…
This Tilt Turn Door SE16 job involved a Door that is stuck at the hinges and is not fully closing. We will need to investigate the problem with the locking mechanism. In order to do this thoroughly we will need to take the door off. In order to repair the door, parts will need to…
Tilt and Slide Door with handle and movement issues. We attended this job yesterday in SW19. On arriving we find that the handle is not positioned correctly which is a common fault and true to the bad design of this particular Tilt and Slide Door. The door will need a couple of extra bolts in…
GU tilt and slide doors with damaged runners need replacing along with the track.
Running system on the tilt and slide door required replacement as a result of excessive wear. The tandem runners were replaced with upgraded versions. In addition with a new track.
UPVC traditional Style sliding door Collier Row RM5. Damaged runners need raising or replacing. If it is determined that the runners need replacing then it will be a two man job. Therefore we will lift the door out for the wheel replacement and then put back in.
Siegenia Tilt and Slide double door E16 Royal Docks. From the inside, the left hand door has a broken handle gearing and also needs bottom two corner brackets replaced. From the inside right-hand door, three corner brackets need replacing. Therefore both doors will need to be taken off for parts to be replaced.
Traditional aluminium sliding doors in Grays RM16. Damaged Runners need replacing. Push bolts needs to be put on on at the bottom of the doors because the locking mechanism is not working full stop. The doors are very old so the existing damaged locking mechanism cannot be sourced to replace.
Traditional Upvc sliding doors on an outside garden office in North Kensington W10. Runners need replacing because the door is stiff. This may be due to settle movements in the building. The door itself is very heavy for the wheels. The wheels will need to be replaced and then the door can be realigned for…
Tilt and slide doors repairs in Lewisham SE4. The runners (Bogeys) are GU and and the locking mechanism and gears are Siegenia Aubi. The runners need to be replaced and and the gearing mechanism on the handle side needs to be replaced because it is broken. Also so the track stop for the runners is…
Double tilt and slide door stuck in locked position. The gearing for the multi point locking mechanism is broke therefore this results in the lock from disengaging. The runners have deteriorated. This resulted in the doors to hang lower than their correct position. Which has likely caused damage to the locking mechanism.
Front Patio Aluminium sliding door Streatham SW16 Door needs runners replaced and realigned so that the back slits fit into the correct position. The handle needs to be replaced. Push bolt lock needs to be put at the bottom. On the Back doors the lock handles need to be replaced and therefore possibly put on…
Tilt and turn window with the top tilt hinge broken. In addition the bottom hinge does not engage when changing function from turn to tilt. Both top swing hinge and bottom hinge to be replaced.
Large aluminium sliding glass doors in Reigate RH2. Three panels each panel about 3 m long and 1/2 m tall. The runners for the main door that is being used have become damaged, therefore will need to be replaced. As a result damaging the main wheel support rib on the track. The main door would…
Hampstead NW3. Traditional sliding doors UPVC repairs, in which runners need replacing on doors. The doors are extremely heavy and as a result they will need the glass to be taken out first. The UPVC frames therefore can be taken out to replace the wheels.
Hendon N3. Traditional double sliding doors aluminium. Runners need replacing on both doors. They need to be realigned and also the static panel is loose. Therefore this is causing problems when trying to close one of the sliding doors full stop from the inside. The left hand door runners definitely need replacing.
